Termékek kávézó berendezési elemek (478)

Product Features: • Primary 240VAC, 50/60 Hz., Secondary 240VAC. • Provides circuit isolation. • Toroidal transformer for high isolation, low noise, light weight, cool operation and low profile. • World wide applications, 50 or 60 Hz. operation (240VAC to 240VAC). • Standard 3-wire, grounded plug (for use with adaptors for proper grounding). • Input (Primary) connected to a 5 foot long cord and standard North American Plug (NEMA 6-15P). • Output (Secondary) connected to a standard - 3 wire grounded duplex receptacle (NEMA 6-15R). • Features include ventilated black steel case, rocker lighted on-off switch and circuit breaker protected output. • North American Mark of Safety - C UL and UL listed (File #E211544). • Indoor use only. • Remember - These units do NOT convert line frequency.

Product Features: • Designed for push-pull tube output circuits. • Enclosed in a drawn steel case, the transformer is completely potted in epoxy. • Frequency response 30 Hz. to 30 Khz. at full rated power (+/- 1 db max. ref. • 1 Khz) minimum. • Lead connection is via 10 bottom mounted lugs. • All units include 40% screen taps for Ultra-Linear operation (if desired). • Finished in a black powder paint (to match the 300P Series power transformers). • Typical applications - Push-Pull: triode, Ultra-Linear pentode, pentode and tetrode connected audio output.

Product Features: • Single winding, does not provide isolation, for use where equipment is already isolated and only voltage change is required. • Flexible world wide applications, 50 or 60 Hz. operation, 115VAC input. • Output taps @ 85, 95, 105, 110, 115 and 125VAC. • Ideal for manual line voltage adjustment for electronic equipment or small appliance operation. • Models 168B, 168C and 168D are CSA certified (209651). • Connection by flexible leads, 8" minimum length. • Remember - These units do NOT convert line frequency.

Product Features: • Used (with 150 Volt full scale A.C. voltmeters) to measure the voltage of 240, 480 or 600 VAC systems. • Primary insulated for 4.0 KV rms test, suitable for L.V. switchgear and motor control use. • 50/60 Hz. operation. • Open construction - "Type H". • CSA certified (209651). • The nominal line voltages of 240 and 480 volts may be exceeded by 25% for 60 Hz. operation. • Insulation system 55°C rise, Class 105.

Product Features: • Designed with nickel alloy cores for high performance and Wide Bandwidth. • Frequency Response: 20 Hz - 20 kHz ±0.35 dB, (ref. @ 1 kHz). • Low distortion at levels up to +27 dBu @ 20 Hz. • Excellent Shielding - Mu Metal Enclosures. • Line Output Transformers are open style (not Mu Metal).

Product Features: • Designed with nickel alloy cores for high performance and Wide Bandwidth. • Frequency Response: 20 Hz - 20 kHz ±0.35 dB, (ref. @ 1 kHz). • Low distortion at levels up to +27 dBu @ 20 Hz. • Excellent Shielding - Mu Metal Enclosures. • Line Output Transformers are open style (not Mu Metal).

Product Features: • Primary 115 VAC, 60 Hz. • All secondaries center tapped, VAC (RMS). • Enclosed, 4 hole chassis mount. • Minimum 6" long leads. • Dual bobbin design - no electrostatic shield required. • Class B insulation (130°C). • Hi-Pot of 2,000V RMS. • UL listed (#E50394) and CSA certified (209651).

EQ158 crystals provide 32.768kHz in an ultra-miniature package. The part is designed to provide the smallest possible component size for real-time clock applications. Their miniature size and rugged construction make them ideal for battery powered, hand-held equipment. Frequency 32.7680kHz Ultra-miniature package: 2.05 x 1.2 x 0.6mm Low mass, rugged construction Packaged in standard EIA tape and reel Low mass and miniature size, ideal crystal for hand-held, battery powered equipment Storage Temperature Range:-55° to +125°C Operating Temperature Range:-40° to +85°C Drive Level:0.5µW maximum Standard Frequency Tolerance:±30ppm or ±50ppm Turnover temperature:±25°C±5°C Parabolic Coefficient:-0.04ppm/°C2 maximum Load Capacitance:12.5pF Motional Resistance (ESR):65kΩ to 90kΩ maximum Motional Capacitance:2.7fF to 7.0fF, 6.4fF typical Shunt Capacitance:1.3pF typical, from 1.6pF to 0.8pF Ageing:±3ppm max. in first year @25°C

Product Features: Primary 120VCA, 50/60 Hz., Secondary 240VAC. Provided circuit isolation. • Torodial transformer for high isolation, low noise, light weight cool operation and low profile. • 50 or 60 Hz. operation, step up (120VAC to 240VAC). • Standard 3-wire, grounded plug (can also be used with adaptors for proper grounding). • Input (primary) connected to a 5 foot cord and standard North American plug (NEMA 5-15P). • Output (Secondary) connected to a standard North American duplex - 3 wire grounded receptacle (NEMA 6-15R). • Transformer Hi-Pot test of 4,000V RMS between primary and secondary. • Features include ventilated black steel case with rocker lighted on-off switch and circuit breaker protected output. • North American Mark of Safety - C UL and UL listed (File #E211544). • Indoor use only. • Remember - These units do NOT convert line frequency.

Product Features: • Designed with nickel alloy cores for high performance and Wide Bandwidth. • Frequency Response: 20 Hz - 20 kHz ±0.35 dB, (ref. @ 1 kHz). • Low distortion at levels up to +27 dBu @ 20 Hz. • Excellent Shielding - Mu Metal Enclosures. • Line Output Transformers are open style (not Mu Metal).

96SMF and 98SMF, SMD 6 x 3.5mm, ultra-low profile, Monolithic Crystal Filter

Product Features: • Designed with nickel alloy cores for high performance and Wide Bandwidth. • Frequency Response: 20 Hz - 20 kHz ±0.35 dB, (ref. @ 1 kHz). • Low distortion at levels up to +27 dBu @ 20 Hz. • Excellent Shielding - Mu Metal Enclosures. • Line Output Transformers are open style (not Mu Metal).

Product Features: • Large core area for excellent low frequency response. • Manufactured with high quality 29M6 laminations (for low distortion). • Concentric wound for excellent coupling. • Isolation type transformer (i.e. separate primary and secondary). • Primary: 600 Ohms (using 6" wire leads). • Secondary: 8 Ohms with a 4 Ohm center tap (using solder logs). • Power: Rated at 12 watts. • Frequency response: 30 Hz. - 20 Khz. (+/- 1 db @ Full Power - 1 Khz. Reference). • Weight: 1 Pound, 4 Oz. • Mounting: 2 Hole bracket mount - on 2 and 13/16" mounting hole centers.

CX11SM crystals are leadless devices designed for surface mounting on PCBs or hybrid substrates. The crystals have very small outline and low-profile and are suited for all low frequency applications. This is a Statek product designed and manufactured by Statek Inc, USA. Contact Euroquartz Sales or Technical for details Frequency Range 32.768kHz and 100kHz to 180kHz High shock resistance Ultra-small ceramic package Low ageing Designed for low power applications Full MIL testing available Drive Level:0.5µW max Freq./Temperature Constant (k):-0.035ppm/°C2 Ageing, first year:3ppm maximum Shock, Survival:5,000g, 0.3ms, ½ sine Vibration, survival:20g rms, 10~2000Hz swept sine Operating Temperature Range Commercial:-10° to +70°C Industrial:-40° to +85°C Military: -55 to +125°C Storage Temperature Range:-55° to +125°C Maximum Process Temperature:+260°C for 20 seconds

Product Features: • Primary 240VAC, 50/60 Hz., Secondary 120VAC. • Provides circuit isolation. • Toroidal transformer for high isolation, low noise, light weight, cool operating and low profile. • World wide applications, 50 or 60 Hz. operation, step down (240VAC to 120VAC). • Standard 3-wire, grounded plug (for use with adaptors for proper grounding). • Input (Primary) connected to a 5 foot long cord and standard 250V 2 pole, 3 wire - North American plug (NEMA 6-15P). • Output (Secondary) connected to two standard - 3 wire grounded receptacles (NEMA 5-15R). • Features include ventilated black steel case, rocker lighted on-off switch and circuit breaker protected output. • North American Mark of Safety - C UL and UL listed (File #E211544). • Indoor use only. • Remember - These units do NOT convert line frequency.

Product Features: • Output power models from 5 to 1,500 milliwatt level available. • P.C. board mount - square pin type (0.025" square typical). • Bifilar winding technique used on center tapped units for balanced resistive and capacitive characteristics. • Rugged black epoxy potted construction produces a completely sealed unit withstanding severe environmental conditions including those of MIL-T-27 (Grade 5, Class S). • Peak working voltage rating of: 100V. • Referring to figures 1-9, if connection is not used - no pin will exist. 101D

A HC49 crystal with formed leads and clip for SMD application. Available in fundamental and 3rd, 5th 7th and 9th overtones. Close tolerances and specifications available. Low-cost, industry-standard crystal unit formed for SMD Available with close tolerances Frequency range 1.0MHz to 200MHz Specifications fully customisable Frequency Range:1.0MHz to 200MHz SL-Cut (<1.3MHz):from ±100ppm -10° to +60°C AT-Cut (>1.3MHz): from ±3ppm 0° to +50°C Shunt Capacitance (C0):4pF typical, 7pF maximum Load Capacitance (CL):Series or from 8pF to 32pF (Customer specified CL) Ageing:±3ppm maximum, 1st year, ±1ppm per year thereafter Drive Level:100µW typical., 500µW max Crystal Holder:Resistance-weld hermetic seal Supply format:Bulk pack or 'Ammo Pak' tape

Product Features: • Designed for driver use ONLY in single ended tube output amplifiers. These units replace coupling capacitor circuits for improved sound. • Closed style with minimum 8" long leads. • All models use bifilar wound windings for exceptional coupling and bandwidth. • Minimum frequency response 20 Hz. - 20 Khz (+/- 1 db max. ref. 1 Khz.). • The core is gapped to support the specified D.C. bias current. • Maximum working voltage - 400 VDC. • Units are Hi-Pot tested at 1,000 VDC. • Core uses Hi grade silicone laminations (29M6). • Units weight - 3 lbs. 2 oz.

Product Features: • Designed with nickel alloy cores for high performance and Wide Bandwidth. • Frequency Response: 20 Hz - 20 kHz ±0.35 dB, (ref. @ 1 kHz). • Low distortion at levels up to +27 dBu @ 20 Hz. • Excellent Shielding - Mu Metal Enclosures. • Line Output Transformers are open style (not Mu Metal).

Product Features: • Primary 115 VAC, 60 or 400Hz. models, 3 case sizes. • Epoxy cast to withstand shock and severe environments. • Two coil design provides balanced windings and low magnetic radiation - no electrostatic shield required. • 228 Series include four, 6-32 x 0.38 machine screw inserts for less strain on P.C. board connections.

Product Features: • Primary 115VAC, 50/60 Hz., Secondary 115VAC. • Provides complete circuit isolation. • Electrostatic shield between primary and secondary to greatly attenuate • surges and noise. • Hi-pot tested to 2 KV RMS. • Circuit breaker in primary. • Standard 3-wire, grounded plug and receptacle. • Input (Primary) connected to 5 foot long cord and standard North American plug (NEMA 5-15P). • Output (Secondary) connected to a foot long "pig tail" cord, 3-wire, standard North American grounded receptacle (NEMA 5-15R). • North American Mark of Safety - C UL and UL listed (File #E211544). • Indoor use only. • Remember - These units do NOT convert line frequency.

Product Features: • Designed with nickel alloy cores for high performance and Wide Bandwidth. • Frequency Response: 20 Hz - 20 kHz ±0.35 dB, (ref. @ 1 kHz). • Low distortion at levels up to +27 dBu @ 20 Hz. • Excellent Shielding - Mu Metal Enclosures. • Line Output Transformers are open style (not Mu Metal).

An ultra-miniature, 2.5 x 2.0 x 0.8mm SMD, clipped sinewave-output TCXO. Excellent temperature stability, from ±0.5ppm. Output level 0.8V p-p minimum into a 10k Ohms //10pF load. RoHS and REACH Compliant. Frequency range 13MHz to 52MHz. Miniature SMD TCXO with good specification. Stability from ±0.5ppm over -20° to +70°C Supply Voltage 1.8V, 2.5V or 3.0Volts Miniature, lightweight and compact Ideal for portable devices such as GPS and handsets Frequency range 13MHz to 52MHz, tolerance from ±0.5ppm. Output 0.8V p-p minimum into a 10k Ohms //10pF load

Product Features: • Primary 230VAC, 50/60 Hz. Secondary 115VAC. • Circuit breaker in primary. • Provides circuit isolation and steps down primary voltage. • Hi-pot tested to 2 KV RMS. • Electrostatic shield between primary and secondary. • Input (Primary) connected to a 5 foot long cord and European (Schuko) grounded plug - note: Old inventory only. • Input - due to U.L. changes in 2007 - New production with the European (Shuko) parts would no longer be U.L. listed. Therefore, we have replaced this input plug with a standard North American 3-wire, 250V plug (NEMA 6-15P). • Output (Secondary) connected to a 1 foot long cord and standard North American 3-wire grounded receptacle (NEMA 5-15R). • North American Mark of Safety - C UL and UL listed (File #E211544). • Indoor use only. • Remember - These units do NOT convert line frequency.

Product Features: • Designed for drop in replacement of original units. • Physically, parts were designed to look similar to original factory units (where possible). • Material used and design specs. were kept as close as possible to the original part to preserve the stock "tone". • Output transformers marked UPGRADE allow for more versatility by added secondary connections that did not exist on the original units.

CXOQ oscillators are ultra-miniature, surface mount units packaged in a 2.50 x 2.00 x 0.89mm package. The oscillators are capable of withstanding high shock environments. The design and build standard including availability of full 'MIL' testing ensures great reliability. This is a Statek product manufactured by Statek Inc, America. Contact Euroquartz Sales or Technical for details. High shock survivability High frequency stability Low acceleration sensitivity (HG version) CMOS and TTL compatible Low power consumption Full military testing per MIL PRF 55310 available Optional enable/disable Low EMI emission Hermetically sealed ceramic package Frequency Range:400kHz to 100.0MHz Supply Voltage:1.8V to +3.3 Volts ±10% Calibration Tolerance:±100ppm to ±30ppm Frequency Stability over Operating Temperature Range Commercial (0° ~ +70°C):±50ppm Industrial(-40° ~ +85°C): ±100ppm Military (-55° ~ +125°C): ±100ppm Output Load:15pF Start-up Time:5ms max Rise and Fall Time:10ns maximum Duty Cycle:45/55% Ageing First Year:±5ppm maximum Shock, Survival:Standard: 5000g, 0.3ms, ½ sine HG: 20,000g, 0.3ms, ½ sine Vibration Survival:20g, 10~2000Hz swept sine Maximum Process Temperature:260°C for 20 seconds

Product Features: • Designed for drop is replacement of original units. • Physically, parts were designed to look similar to original factory units (where possible). • Inductance measured at rated D.C. current. • Material used and design specs. were kept at close as possible to the original part to preserve the stock "tone". • Units are vacuum impregnated with polyurethane varnish for quiet and long life operation.

Product Features: • Single winding, does not provide isolation, for use where equipment is already isolated and only voltage change is required. • Flexible world wide applications, 50 or 60 Hz. operation, step down (230VAC to 115VAC) or step up (115VAC to 230VAC). • Totally enclosed rear case, includes handy internal grounding bolt. • Extra vacuum varnish for use in high humidity. • Includes a rear mounted (but not wired), standard 115VAC, 3-wire receptacle. • Enclosed case with convenient knockouts and includes two cable clamps allowing for easy wire connections. • Models 170SE, 170AW, 170BE, 170CE and 170DE are CSA certified (209651). • Connection by flexible leads, 8" minimum length. • Remember - These units do NOT convert line frequency.

Product Features: • Designed for push-pull tube output circuits. • Units are designed to provide ample "headroom" at bass frequencies (note the weight of each transformer). • All models have a secondary tapped fro 4, 8 or 16 ohm outputs. • Enclosed (Shielded), 4 slot, above chassis Type "X" mounting. • Manufactured with plastic coil forms for coil support and insulation. • Frequency response 30 Hz. to 30 Khz. at full rated power (+/- 1 db max. - ref. 1 Khz.) minimum. • Insulated flexible leads 8" min. • All units (except the 1650G) include 40% screen taps for Ultra-Linear operation (if desired). • Typical applications - Push-Pull: triode, Ultra-Linear pentode, pentode and tetrode connected audio output. The 1650G does NOT have primary screen taps and will not support "Ultra Linear" applications.

Product Features: • Designed for push-pull tube output circuits. • Enclosed in a drawn steel case, the transformer is completely potted in epoxy. • Frequency response 30 Hz. to 30 Khz. at full rated power (+/- 1 db max. ref. • 1 Khz) minimum. • Lead connection is via 10 bottom mounted lugs. • All units include 40% screen taps for Ultra-Linear operation (if desired). • Finished in a black powder paint (to match the 300P Series power transformers). • Typical applications - Push-Pull: triode, Ultra-Linear pentode, pentode and tetrode connected audio output.